> Vampire 500 V2+ for Amiga 500 / Amiga 2000
Vampire 500 V2+ for Amiga 500 View larger
Previous Next

Vampire 500 V2+ for Amiga 500 / Amiga 2000

New product

Vampire 500 V2+ for Amiga 500  / Amiga 2000 :

FPGA processor 68080@80MHz (can be compared to a 68040@200MHz ou 68060@140MHz), 128MB Ram, Specific SAGA TRUECOLOR Graphic's controller with HDMi output, Fast IDE 2.5 inch controller (can be used for booting on it), MicroSD slot (can't be used for booting on it)

Must be plugged in the 68000 socket on the Amiga 500 / 2000 (*) motherboards !

More details

315,83 €

  • Without Kit
  • Kit with Cloanto Workbench 3.1 Licence (+35,90 euros french VAT included)
  • Kit with Workbench 3.1 Floppy disks (+45,90 euros french VAT included)
  • Without USB Blaster Kit
  • With USB Blaster Kit (+12,90 euros french VAT included)
  • Without CPU board
  • With CPU board for Amiga 2000 (+ 28,90 euros VAT included)
  • Without MicroSD slot extender
  • With MicroSD slot extender (+11,90 euros french VAT included)

More info

Vampire 500 V2+ for Amiga 500 Amiga 2000 :

- FPGA processor 68080@80MHz (can be compared to a 68040@200MHz ou 68060@140MHz),
- 128MB Ram,
- Specific SAGA TRUECOLOR Graphic's controller with HDMi output (P96 driver included),
- IDE 2.5 inch controller (can be used for booting on it) up to 13MB/sec,
- MicroSD slot (can't be used for booting on it),
- Expansion port for further expansion boards (network, Wifi ...).

Must be plugged in the 68000 socket on the Amiga 500 / 2000 (*) motherboards !

N.B. : ECS games or softwares use the original RGB / Scart connector and the motherboard audio connectors must be also used for sound.

Firmware can be upgraded directly from the Workbench !

(*) For Amiga 2000, you can either use the 68000 socket or the CPU board.