Pack PCMCIA adapter with a 16GB compact flash memory card and memory card access software included on a floppy disk
IDE4 Zorro 2 board for Amiga 2000 :IDE controller for Amiga 2000, 2 x 3.5 inch IDE + 1 x CF Slot, Kickstart 2.05 minimum required, IDEFix driver needed for using the second IDE port (not included), CF Slot can be used as master or slave (jumper on the board), Zorro2 port required, HDD activity LED connector
Amiga 600 / Amiga 1200 IDE 2.5 / Compact Flash Adapter : Allow you to use a compact flash memory card as an harddrive on the internal IDE connector, 5cm cable included N.B. : the compact flash memory card is not included ! You can add a 8GB memory card HERE
Pack CF 4GB / IDE adaptater / Workbench 3.1 : Complete pack which includes one Compact Flash / IDE adapter (one IDE cable is oncluded), one 4GB Compact Flash memory card and the Workbench 3.1 installed with an electronic licence, all i ready to run when the package is received ! 1Mo ChipRAM and 4Mo FastRAM required.Special price :only 35,90 euros instead...
IDE / Compact Flash Adapter + 4GB memory card + Workbench 3.1 : Ready to run pack including the Workbench 3.1 installed on the 4GB memory card and the full Workbench 3.1 floppy disk setN.B. : one IDE 2.5 ribbon is included !
EXTernal Compact Flash on IDE44 CF2IDE adapter :For using a Compact flash on the 44 pins IDE port of the Amiga 600 / 1200 motherboards.N.B: Case must be adapted in order to can plug CF above PCMCIA port.
INTernal Compact Flash on IDE44 CF2IDE adapter :For using a Compact flash on the 44 pins IDE port of the Amiga 600 / 1200 motherboards.
1x IDE 2.5 / Compact Flash / 1 x IDE 3.5 Adapter :For using a compact flash memory card and a 3.5 inch IDE device in any Amiga 1200 / 600.
IDE CF Trapdoor: Screws supplied. Compact Flash not supplied. IDE compact Flash not supplied. IDE Cable not included. Compatible New Cases A1200.net for Amiga 1200.